[Solved] Dedicated server, virtual box

[bin.zwieda]

also delete this screenshot, to hide this mentioned password...
just to be sure...

[Hynsei_A.I.]

Ok, still nothing. I must have done something wrong?

http://i817.photobucket.com/albums/zz91/alexhynes567/Wargame%20server/Image3linuxcodebox_zps678cc159.png~original

http://i817.photobucket.com/albums/zz91/alexhynes567/Wargame%20server/Image2superhubport_zps15fb3a3f.png~original

Edit: Could it be to do with bridging the network, or not setting up the Ip correctly? Or would the server not connect at all if that were the case?

[bin.zwieda]

buddy, you make me think, i am on some candid camera show?


the first screenie: there is no change to the one before!?

the second: i asked you to setup TCP and UDP, not just TCP


maaaaaaaaaaaaaaaan!


when requesting the server at eugen, you need to tell them your official IP.
you did get the server from THEM, not someone else, right?

you need to use THIS official ip adress for the serverstart command!!!!


maaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaan!

[Hynsei_A.I.]

It's not my weekend, ok. I've been a little ill lately and according to my girlfriend I am retarded while I am ill.

The first screenie is just to show the change in ip.
I got it from Eugen but in the email all they asked for was for my wargame login name, and that I was running debian. They then sent me an activation code for the server which I had to put in one of the files.

Ill try it with the changed super hub settings and see what happens.

Edit: Nope still nothing.

Edit 2: Ok now its saying on repeat:
"Connecting to match making server
Failed to connect to match making server"

This is since changing the Super hub settings.

[bin.zwieda]

buddy, slowly:

your official ip does NOT start with 192.168...


such a adress is ONLY used for internal.
it can NOT be accessed via the internet.

as long as you start the server with something like that, it can´t work.

i´m gonna look for something to check for your oficial ip... brb

and don´t touch anything in the meantime.

concerning your little lady: tell her to clean something, if she gets nasty...

[naizarak]

when entering your IP, you need to use your WAN address, not LAN(ie 192.168xxxx). google "whats my ip address" and use that value. also open both UPD and TCP ports in your router config

[bin.zwieda]

ok, google for
locate ip

it will give you lots of links.
those sites can tell you your official ip!

check 2 or 3 sites, they all should give the same result.

THAT will be the ip to use in your startcommand!

[Hynsei_A.I.]

Ok, ive got my ip and entered it, but its still showing the "connecting fail" command lines on repeat. I have also opened both tcp and udd ports.

[bin.zwieda]

screenshot please

[Hynsei_A.I.]

Screenshots:

Image 1 super hub altered correctly:
http://i817.photobucket.com/albums/zz91/alexhynes567/Image2superhubportaltered_zpsfff091a1.png~original

Image 2 Ip entered correctly:
http://i817.photobucket.com/albums/zz91/alexhynes567/Image5linuxcodeboxfailip_zps4802d017.png~original

Image 3: Fail/connect repeat code:
http://i817.photobucket.com/albums/zz91/alexhynes567/Image4linuxcodeboxfail_zpsd254bdc4.png~original